Arriving at a pattern that yields a decent pair of sneakers was not as it easy for me as it seemed. Sure you can follow those YouTube videos, but often the end result looks more like a pair of felt socks with ribbon laces that only a toddler doll would wear! I wanted something cool, something a little more "grown-up." So after attempting to create my own pattern from scratch, I looked at what was already available, made a few tweaks and then transformed those modest craft projects into something "real." The challenge was trying to make a pair of men's shoes that had a tiny bit of volume over the toes. Ordinarily, you need a foot form, otherwise known as a "last" which is the exact size and shape of the finished shoe. I made a set out of oven baked clay. The challenge is creating one that also mimics the exact proportions of the doll's foot in the shoe. In terms of a tutorial, this complicate things immensely. So, instead, I am showing you how to put this together on the doll's foot and you can cheat by 1) taping on cotton to pad the doll's foot before gluing the upper to the sole or 2) taking a tiny wad of cotton and stuffing it into the finished shoe.
In any case, I begin with the "Converse" (hi-top) sneaker as well as the ankle grazing sneakers and then simplify the process with an easy-to-make 1-piece and another 2-piece pattern which can be "embellished" to resemble most modern sneakers. For each style, I show the corresponding pattern, however if you scroll down to the bottom of this page, I have the patterns--drawn against 1/4-inch graph paper-- so that you can simply copy or trace off and make whatever modifications are needed to fit your own doll.
The Converse Shoe
1. For this shoe, here are the pattern pieces needed. Note there are two soles, one for the FR Hommes doll, the other for Ken. The sole should be a little bigger than the doll's foot. For best results, trace each pattern piece off onto the wrong side of your material, then carefully cut. Though I have drawn the cuts which fall over the shoe sole, you can cut in a straight line then cut the notches afterwards.
2. For each shoe: There is the back quarter (cut from black fabric), the heel (cut from white leather), an insole (white) cut from card stock, the outer sole (black) from a sheet of craft foam, and a white rubber band. glue on the leather bits to the toe and the heel while the pattern pieces are still flat.
3. Place the insole on the doll's foot. Begin with the "vamp" (the toe) and after cutting in the notches, glue the bottom edge around insole. Line up the center back of your back quarter so that it lines up with the back of the heel. If necessary, you can add a few stitches to secure the upper to the insole.
4. Add a layer of strong glue to the bottom of the shoe.
5. Firmly press on the outer sole to the rest of the shoe.
6. Use a dowel or a pencil as a rolling pin over the bottom of the shoe
8. Cut the rubber band in half and fit it around the shoe to get the exact fit. Cut away the excess. Next, put a layer of rubber cement around the inside of the rubber band. Allow the glue on both edges to dry. The surfaces will be tacky.
9. Very carefully, line up the middle of the rubber band to the center front of the shoe.
10. Carefully line up the rubber so that it is flush against the top and bottom of the shoe as you wrap it completely around.
11. The back of the band should meet flush together. If the edges won't stay down, you can use a tiny bit of tape to hold the two sides together.
12. With everything in place, feel free to customized. Use a pencil to lightly draw a line around the center of this band. This will serve as a guide. Place the shoe on the table.Take a fine tipped permanent marker and very carefully draw in the line.
For the shoe laces, I cut a very thin strip of the leather. I used the needle end of a circular compass to punch a hole on either side of the back quarter. If you have trouble threading the shoe lace, use a toothpick to help push it through the hole.
Here's my finished pair of sneakers!
The photo below shows the bottom view of these shoes.
We're going to make the same shoes again. This time I've added more details, more structure to the shoe.
2. Here I have used an iron-on interfacing. Note that it is centered in the middle of the vamp, free of the seam allowance.
3. If you use iron-on interfacing, be sure the smooth side is up and the grainy side is down. You can also use a sturdy sheet of paper instead. Glue this directly to the vamp and press.
4. Next, glue the toe to the vamp. Press, using an iron on low setting. Use a sheet of transparent paper to protect the iron while you are pressing this in place.
5. Using a toothpick, apply fray check (modge podge or clear drying craft glue) around the edges of the tongue on the vamp.
6. Because my fabric frays, I have decided to turn the edges down and glue in place. Begin on either side of the back quarter. The pattern piece normally used for the decorative heel at the back of the shoe can also be used, instead, as an interfacing if your fabric is anything less than sturdy. This will give more structure to the back of the shoe. Line the center back of the interfacing with that of the back quarter as shown. Press.
7. Turn down the top edge
8. If you are using leather for your heel, you don't have to use the interfacing. The leather will add structure to the back of the shoe.
9. For each edge that will be turned under and glued to the bottom of the inner sole, cut in notches. Notching the edges helps to eliminate bulk. under the foot of the shoe.
10. Though I winged it on the first shoe, it is really best to plan everything ahead while the shoe is still flat. Now is the time when you can punch the holes, add top stitching or any other embellishments.
11. For this shoe, I decided to add tiny metal eyelets. After punching the holes, I place an eyelet on the (compass) needle. I placed the needle back in the hole and remove it without removing the eyelet. Make sure the eyelet is completely passed through to the other side. Then, using a small pair of flat nosed jewelry pliers, quickly press the pliers to flatten the eyelet in place.
Note: if you are going to use machine top stitching, you should do that before installing the eyelets!
12. Now it's time to glue.Turn the pieces over, wrong side up. Add rubber cement to the bottom of the insoles and to the bottom, notched edges of the quarter back.
13. Add glue around the front, notched edge of the vamp.
Place the inner sole on the doll's foot (dry side down to the doll, glue side up facing you).
14. Place the vamp over the foot then quickly fold the side edges down onto the bottom of the insole. If you need to, you can secure the edges in place with a needle and thread.
15. Because I am going to use an air dry clay for the sole, I am gluing on a middle sole because it improves the clay's adherence to the shoe. You can skip this step if you find your clay adheres well enough or if you decide to use foam board as your sole instead.
16. Using a pencil or a wooden dowel as a rolling pin, press to make sure everything is glued in place
17. You have the option of creating your sole by cutting a shape out of thick foam sheet or you can fashion it out of air dried clay. Craft foam is quick and easy. Clay allows you to custom shape the sole and even press in patterns on the bottom of the shoe. To start, take a small ball of clay and shape it into a rectangular shape.
18. Place that onto the bottom of the she and press it into the shape you want. You might want to look at an actual shoe to get an idea of what shape you should be shooting for.
19. Don't rush it. Keep working until the shape is just what you want. Cut away the excess. Smooth the sides and bottom when you are finished. Don't worry about the imperfections. They will be hidden with a band.
20. Again, this is a step you really don't need. You could simply paint the sole you just created out of clay once it has dried. Or, you can cut a strip of leather and encircle the sole as I have done in this photo. Be sure to butt the edges at the back of the shoe. Apply rubber cement to both surfaces and then press in place.
Yes, I know, this is a little bit of work. But the end result is so much better than those molded plastic shoes they sell out of China!
Here's the same shoe but in a monochrome light blue denim with light blue leather accents.
The Sports Shoe
The ankle grazing sneaker is really the same with a slightly different pattern. Here, I've made it pretty simple. There is the vamp which doesn't have a toe or a tongue and the back quarter. My sue is made of blue denim. Instead of laces, I poked holes and used white twist ties (to simulate velcro closures). The edging around the top and where the heel would be, is all done with a fine brush and white paint. The sole is done with air-dried clay. Simple!
This is the same shoe but using leather instead of fabric. The black leather with white sole has become a modern classic in mens footwear fashion.
Another leather shoe where I added metal eyelets and leather shoe laces. Instead of craft foam or clay, I cut the soles and heels out of a course leather. Since the entire shoe is made of leather, you don't need interfacing. But we can do something even more simple!
Les Booties
I wanted to make a hot pair of Rock 'N Roll shoes for my very trendy Ken, so I traced his foot and ankles to create a 2-piece shoe.
1. There is only one pattern plus the soles. For this shoe I used a stretch fabric. You could also use a faux leather which also stretches.
2. Stitch both sides. Turn down the top and tack down.
3. Place the insole on the doll's foot. Add a line of rubber cement to the undersides of the shoe upper's edges and to the bottom of the insole. When dry, bend down the edges onto the bottom of the insole.
4. Since this is shoe is entirely out of fabric, I add a few stitches to secure the upper in place.
5. Add your sole. Here, I have used an air dry clay. This is because I will customize it in a very special way. You can fake the lacing with a few stitches over the top of the shoe.
6. Once the soles are dry and hard, I repeat the pattern of the uppers using matching paint.
Using the same pattern, I decided I would make another pair of Pop Rock shoes with "steel" toes.
1. Putting this shoe together is really no different than the other shoes we've made already. The difference is, the pattern is pretty simple to make. Lay the doll's foot on its side and trace around. Allow for seam allowance all around.
2. Stitch down the center front of the pattern. Turn the top down and glue or stitch down. If you are cutting this from leather or another non-woven material, you may not need to hem.
3. Stitch the back seam and turn right side up.
4. Notch the bottom side of the upper, then glue the upper to the bottom of the insole.
5. What you don't want especially for a male doll, is a flat shoe. I cheat by taking a tiny piece of cotton to stuff in the toes. Start out with a small amount, adding more if needed.
6. Take a small stick and stuff it towards the toes.
7. For the metal toe, I used a tiny strip of aluminum self adhesive tape. Wrap the toes once, leaving the tip of the toe on the shoe exposed.
8. Wrap a second time, making sure it overlaps the tip of the toe. Hit the toe to square it off. Tuck everything under the foot and glue down
9. For this shoe, I will be using craft foam. But in this instance I wait until after the upper is finished. Place the shoe upper on the sheet of craft foam and trace around. If it is a little too big, that is okay because you can always cut it down later.
10. Using a strong glue, attach the upper to the black foam sole. When it has set. put a thin line of rubber cement around the perimeter of the sole.
11. You can use a black rubber band or a thin piece of black leather. Put a layer of rubber cement on the band. When both surfaces have dried, carefully press the band to the shoe beginning at center front. Again, but the edges end to end at the center back. If necessary you can use a tiny bit of tape to keep the edges together.
We can even go more simple by reducing the pattern to a single piece. The characteristics of the average sports shoe, is one that has a rather intricate set of patterns and inserts. By itself, this basic shoe pattern resembles a leather sock. However, you can use this as a canvas and add as many embellishments as desired to create a thoroughly modern looking shoe. The above photo shoes the basic shoe in suede. It has a leather sole and heel, but you can use any of the other materials we used throughout this project. For this the last shoe I made for this project, I decided to return to a faux leather with tiny scraps of leather.
2. On the wrong side, stitch the shoe down the center back seam.
3.Turn right side up and put it on the doll's foot. Place the insole on the doll's foot. Notch the edges, add the glue and turn under onto the bottom of the insole.
4. Cut out a sole from a thick piece of craft foam. Glue to the bottom of the shoe.
5. Cut a white rubber band in half. Add a line of rubber cement to the side edges as well as to the underside of the rubber band. Wrap around the shoe with it, butting the edges at the back. Use a bit of tape, if necessary, to hold the rubber band in place.
6. Add embellishments. Here, I've added a tiny rectangle of leather then drew tiny lines to represent lacing.
7. Using all of those tiny little scraps that have fallen on the floor, I used them to create the embellishments that typify this type of sports shoe.
 |
| This pattern is on 1/4" graph paper. |
Oh my, oh my....anything HE can wear, so can she! Coming up next: a short tutorial on making sneakers for her, even if she has high heeled feet!
.
De: Fashion Doll Stylist - https://fashiondollstylist.blogspot.com/2020/06/shoe-biz-sneaking-around-with-him.html
Fecha: June 24, 2020 at 11:08PM
.
Haz clic en la imagen de abajo para ver otro de mis Blogs.
Encontraras mas publicaciones interesantes.
0 comentarios:
Publicar un comentario