The final outfit in the Victorian collection, was the little sailor suit. I struggled with trying to figure out whether to make the opening of the top at the front or the back. Both had their advantages and disadvantages, but the outfit would be very small, and I wanted to keep 'bulk' to a minimum.
So I finally decided to make the top open at the back, which wasn't 'historically accurate', but sometimes ease of sewing, and the final look are more important (lesson learned from the coat). I stitched the striped neck insert onto the navy blue top, all the way around the neckline.
So I finally decided to make the top open at the back, which wasn't 'historically accurate', but sometimes ease of sewing, and the final look are more important (lesson learned from the coat). I stitched the striped neck insert onto the navy blue top, all the way around the neckline.
Then I made the collar as a separate unit. I decided against attaching it on one side only and using snaps on the other, since it might look uneven. The entire collar would be separate.
I designed it so the front 'points' would not come to a sharp point, but a little wider blunt one, so that I could better hide tiny snap fasteners under them. The collar is lined, sewn all the way around, leaving an opening at the back neckline, so it could be turned right side out. After clipping the corners and curves, and turning it right side out, I stitched the back opening closed, pressed the collar, sewed some wider silk ribbon under the points, for the ties to make into a bow, and sewed tiny black snaps at the collar points on top of the ribbon, and on the front of the top. I used black snaps so they'd not stand out against the navy blue. I thought it worked quite well...
I designed it so the front 'points' would not come to a sharp point, but a little wider blunt one, so that I could better hide tiny snap fasteners under them. The collar is lined, sewn all the way around, leaving an opening at the back neckline, so it could be turned right side out. After clipping the corners and curves, and turning it right side out, I stitched the back opening closed, pressed the collar, sewed some wider silk ribbon under the points, for the ties to make into a bow, and sewed tiny black snaps at the collar points on top of the ribbon, and on the front of the top. I used black snaps so they'd not stand out against the navy blue. I thought it worked quite well...
Of course, now I have to pay attention that his collar is centred around his neck, which I didn't do in this photo. Or I could sew a snap under the back of the collar to hold it in place.
.
De: Antique Lilac - Blog - http://www.antiquelilac.com/blog/a-sailor-suit
Fecha: May 16, 2018 at 12:19PM
.
Haz clic en la foto de abajo para ver otro de mis Blogs.
Encontraras mas publicaciones interesantes.
0 comentarios:
Publicar un comentario